MasterMIG 250W Dual Pulse [machine with a cooler] standard
€2.015,37
| Input | |
|---|---|
| Tank capacity | |
| MIG welding current | |
| MMA welding current | |
| MIG duty cycle | |
| Output working voltage | |
| Wire feeder | |
| Wire diameter | |
| Wire feeding speed | |
| Hot Start | |
| Welding wire spool | |
| TIG Lift | |
| Synergy | |
| 2T/4T Control | |
| s4T control | |
| SPOT welding | |
| Additional MIG functions | Burn Back, Post-gaz, Pre-gaz, programy synergiczne, pulsacja, regulacja indukcyjności, Slow Feed, spool gun, Wave Control |
| Water cooler | |
| TIG welding current | |
| VRD | |
| Down slope | |
| Protection class | |
| Power factor (cosφ) | |
| Insulation class | |
| Weight | |
| Arc Force | |
| Current consumpiton | |
| Efficiency η | |
| Dimensions |
Περιγραφή
MULTOPROCESS, SYNERGIC MIG WITH DOUBLE PULSE
SPARTUS® MasterMIG 250W Dual Pulse is a modern multi-functional inverter machine for welding with MIG/MAG, TIG and MMA methods. During its production, modern technologies were used, such as: IGBT transistors, PWM, MCU control system. The machine is powered from a 400V three-phase network and enables welding with a current of up to 250A for all three methods.
SPARTUS® MasterMIG 250W Dual Pulse have a number of modern functions necessary for high-performance and high-quality MIG/MAG welding of materials such as steels, stainless steels, acid-resistant steels and aluminum alloys. It will be used especially when welding aluminum and its alloys, thanks to the use of advanced functions, dedicated to welding demanding alloys.
The most important functions:
- 1P (Pulse) – MIG/MAG welding with pulsation, which significantly facilitates obtaining a spray arc
- 2P (Dual Pulse) – MIG/MAG welding with double pulsation
- Welding in two operating modes 2T/4T
- Spot welding
The use of double pulsation in the MIG/MAG method allows obtaining a weld of quality and aesthetics comparable to the TIG method. The benefits of using double pulsation in the MIG/MAG method:
- High aesthetics (husk effect)
- Higher welding efficiency compared to the TIG method
- Smaller thermal deformations compared to the TIG method
- When welding aluminum requires less skill from the operator in relation to the TIG method
Simple to use and intuitive function panel allows precise control of parameters for MIG/MAG, TIG and MMA methods. For the MIG/MAG methods it is possible to smoothly adjust the welding parameters such as: welding voltage, wire feed speed, inductance. In addition, the machine is equipped with synergic programs in which the parameters are programmed – according to the welding mode and the material being welded.
SPARTUS® MasterMIG 250W Dual Pulse is equipped with a professional four-roll wire feeder, which allows you to work with a long welding handle regardless of the type of wire used. Despite the small compact size and weight, the machine is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg.
Examples of applications: workshop work, renovation works in the field, automotive – welding of galvanized car bodies (brazing), muffler welding, production sector, light industry, high-performance aluminum welding.
