EasyTIG 208P AC/DC package
€490,99
| Input | |
|---|---|
| MMA welding current | |
| TIG duty cycle | |
| Hot Start | |
| Up slope | |
| Gas post flow | |
| Control plug | |
| 2T/4T Control | |
| AC wave forms | |
| TIG welding current | |
| Arc ignition | |
| Gas pre flow | |
| Down slope | |
| TIG Pulse | |
| Pulse Amps | |
| No-load voltage | |
| Pulse Width | |
| Pulse frequency | |
| Power factor (cosφ) | |
| AC frequency | |
| Protection class | |
| AC balance | |
| Insulation class | |
| Weight | |
| Remote control | sterowanie w rękojeści potencjometr, sterowanie w rękojeści UP&DOWN |
| Arc Force | |
| Current consumpiton | |
| Efficiency η | |
| Dimensions |
Περιγραφή
LIGHTWEIGHT TIG AC/DC PULS
SPARTUS® Easy TIG 208P AC/DC is a modern digitally controlled inverter welding machine, constructed on the basis of IGBTs. Allows welding TIG AC/DC and MMA AC/DC modes. It is powered with single-phase 230V source power.
Easy-to-use digital control panel provides instant access to the welding machine’s functions.
EasyTIG 208P AC/DC enables two methods of arc ignition:TIG HF (high frequency) and TIG Lift (with scratch ignition). A diagram of TIG parameters on the panel allows for full adjustment:
– gas flow time before and after welding
– up slope and down slope time.
In addition, the built-in pulse welding function (frequency 0.5 – 200Hz) enables adjustment: base amps, pulse amps, pulse frequency. Thanks to these parameters the machine is perfect for joining even very thin sheets.
Depending on the welder’s preferences EasyTIG 208P AC/DC can work in 2T or 4T mode.
EasyTIG 208P AC/DC will work useful during welding aluminum, thanks to the smooth balance adjustment in the range 10 – 99%.
MMA welding mode (to 200A) is assisted by functions: Arc Force and Hot Start.
EasyTIG 208P AC/DC is a perfect machine for production and maintenance.
Examples of use: portable repair, workshop, maintenance, constructions.
