EasyTIG 203P DC package
| Input | ~1× 230V ± 10% 50 / 60 Hz |
|---|---|
| TIG duty cycle | 60% |
| Hot Start | 1 |
| Up slope | 0 – 10s |
| Control plug | – |
| 2T/4T Control | 1 |
| TIG welding current | 10 – 200A |
| MMA welding current | 10 – 200A |
| Power factor (cosφ) | 0.6 |
| Efficiency η | 85% |
| Insulation class | H |
| Protection class | IP21S |
| Weight | 7.9kg |
| Dimensions | 420 x 135 x 240mm |
| Arc ignition | HF |
| Gas pre flow | 0 – 2s |
| Gas post flow | 0 – 10s |
| Down slope | 0 – 10s |
| Pulse Amps | 5 – 200A |
| No-load voltage | 69V |
| Pulse Width | 5 – 95% |
| Pulse frequency | 0.5 – 200Hz |
| Arc Force | 1 |
| Current consumpiton | TIG 32A / MMA 47A |
Περιγραφή
EASY TO USE TIG DC WITH PULSE
SPARTUS® Easy TIG 203P DC is lightweight and easy to use TIG DC with pulse. Allows welding TIG AC/DC and modes in 10 – 200A range. It is powered with single-phase 230V source power.
The device is equipped with a clear function panel, the operation of which has been reduced to a minimum – a multifunctional knob and two buttons.
Despite its simple structure EasyTIG 203P DC is equipped in advanced functions supporting the welding process in TIG method. A diagram of TIG parameters on the panel allows for full adjustment:
– gas flow time before and after welding
– up slope and down slope time.
In addition, the built-in pulse welding function (frequency 0.5 – 200Hz) enables adjustment: base amps, pulse amps, pulse frequency. Thanks to these parameters the machine is perfect for joining even very thin sheets.
Depending on the welder’s preferences EasyTIG 203P DC can work in 2T or 4T mode.
MMA welding mode (to 200A) is assisted by functions: Arc Force and Hot Start.
Thanks to its lightness and handy construction EasyTIG 203P DC is perfect for outdoor works.
Examples of use: portable repair, workshop, maintenance, constructions.
