EasyTIG 208P AC/DC package
| Input | ~1× 230V ± 10% 50 / 60 Hz |
|---|---|
| TIG duty cycle | AC 35% / DC 40% |
| Up slope | 0 – 10s |
| Hot Start | 1 |
| Control plug | 9SPA – SPARTUS® |
| 2T/4T Control | 1 |
| TIG welding current | AC 10 – 200A / DC 10 – 170A |
| MMA welding current | AC 10 – 170A / DC 10 – 170A |
| Power factor (cosφ) | 0.6 |
| AC wave forms | prostokątny |
| Efficiency η | 85% |
| Insulation class | H |
| Protection class | IP21S |
| Weight | 8.7kg |
| Arc ignition | HF |
| Dimensions | 450 x 135 x 230mm |
| Gas pre flow | 0 – 2s |
| Gas post flow | 0 – 10s |
| Down slope | 0 – 10s |
| TIG Pulse | 1 |
| Pulse Amps | AC 10 – 200A / DC 10 – 170A |
| No-load voltage | 79V |
| Pulse Width | 5 – 95% |
| Pulse frequency | 0.5 – 200Hz |
| AC frequency | 60Hz |
| AC balance | 10 – 99% |
| Control options | sterowanie w rękojeści UP&DOWN, sterowanie w rękojeści potencjometr |
| Arc Force | 1 |
| Current consumpiton | TIG DC 28A / TIG AC 33A / MMA DC 41A / MMA AC 39A |
Περιγραφή
LIGHTWEIGHT TIG AC/DC PULS
SPARTUS® Easy TIG 208P AC/DC is a modern digitally controlled inverter welding machine, constructed on the basis of IGBTs. Allows welding TIG AC/DC and MMA AC/DC modes. It is powered with single-phase 230V source power.
Easy-to-use digital control panel provides instant access to the welding machine’s functions.
EasyTIG 208P AC/DC enables two methods of arc ignition:TIG HF (high frequency) and TIG Lift (with scratch ignition). A diagram of TIG parameters on the panel allows for full adjustment:
– gas flow time before and after welding
– up slope and down slope time.
In addition, the built-in pulse welding function (frequency 0.5 – 200Hz) enables adjustment: base amps, pulse amps, pulse frequency. Thanks to these parameters the machine is perfect for joining even very thin sheets.
Depending on the welder’s preferences EasyTIG 208P AC/DC can work in 2T or 4T mode.
EasyTIG 208P AC/DC will work useful during welding aluminum, thanks to the smooth balance adjustment in the range 10 – 99%.
MMA welding mode (to 200A) is assisted by functions: Arc Force and Hot Start.
EasyTIG 208P AC/DC is a perfect machine for production and maintenance.
Examples of use: portable repair, workshop, maintenance, constructions.
